2-in-1 Network Cable LAN Tester and Multimeter Digital

This innovative device is ideal for network installers or technicians and will allow the user to easily check cable integrity or measure AC & DC voltage, current, resistance, and continuity etc. without needing to carry two separate devices. The unit will check for cable continuity, open-circuits, short-circuits, and cross-connects etc. A remote terminator is included and enables the user to check network cables at a wall jack or patch panel. Supplied with loop back cable, LAN terminator, and multimeter leads.

LAN tester specifications:

• LAN tester checks faults & miss wired conductors
• Manual or automatic testing

Product Specifications

• Continuity buzzer : true
• AC Current Ranges : 2.0mA, 20.0mA, 200.0A
• AC Current Accuracy : 2.0%
• DC Current Ranges : 2.0mA, 20.0mA, 200.0mA
• DC Current Accuracy : 1.5%
• Resistance Ranges : 200.0Ohm, 2.0Kiloohm, 20.0Kiloohm, 200.0Kiloohm
• Resistance Accuracy : 0.8%
• Measures in Celcius : false
• Measures in Fahrenheit : false
• Measures in Kelvin : false
• AC Voltage Ranges : 200.0mV, 2.0V, 20.0V, 200.0V, 600.0V
• AC Voltage Accuracy : 1.2%
• DC Voltage Ranges : 200.0mV, 2.0V, 20.0V, 200.0V, 600.0V
• DC Voltage Accuracy : 0.5%
• Records Minimum : false
• Records Maximum : true
• Data Hold : true
• Relative Measure : false
• Display Type : LCD
• DMM Control from PC : false
• Safety Rating Cat : Cat III
• Safety Rating Max Volt : 600.0V
• Count / Maximum Reading : 3.0pc
• True RMS : false
• Autorange : true
• Optical Sensor : false
• Measures duty cycle : false
• Measures dwell : false
• Length : 162.0mm
• Width : 74.5mm
• Depth : 44.0mm
• Probe Type : High Grade Meter Probes
• Connection to meter : Shrouded 4mm Banana Plug
• Meter Input Impedence : 10.0Megaohm
• Input Protection Fuse : 200.0mA
• Measures diode : true